Bosby & associates

Replacement Laser for Zygo® Mark-I, Mark-II, Mark-III, Mark-IV, Mark-IV-XP, and Mark GPI XPS interferometers. – $2,950

New Lumentum laser with metal alignment rings installed. Must return old, defective laser.

New Replacement Laser for Zygo® GPI and VeriFire interferometers. $2,950

Also available, new Verifire/GPI laser power supplies at $1,400.

Replacement pellicle for Zygo® Attenuation Filter, 2-inch, 4-inch and 6-inch

$495, $995 and $1,495

New Laser for ADE-Phase Shift Technology MiniFIZ – $4,950

Direct replacement laser for the MiniFIZ.
Not OEM, not frequency stabilized.
Has mounting rings for easy installation.
Must return your old, defective laser.

Also available, laser power supplies at $495.

Scanner for Zygo New View – PIFOC (New view 100/200)

PIFOC Scanner, current-feed, used, S/N 95299 – $4,950
PIFOC Scanner, current-feed, used, S/N 39822 – $4,950
PIFOC Scanner, current-feed, used, S/N 61299 – $4,950
PIFOC Scanner, current-feed, used, S/N 78623 – $4,950
PIFOC Scanner, current-feed, used, S/N 83005 – $5,500 I have expansion board and ramps for this one.

Boards for older systems

Zygo Type2 Board

Matrox PCVisionPlus FG board, A1/N2875; 204-00016-00, PCI connectors, 2000 vintage

Matrox Pulsar and Corona FG board, PCI bus

PST EFG Boards

ADE-PST Frame Grabber/Signal board, E55082D
PCI connectors; MiniFIZ and/or OptiFlat

ADE-PST Frame Grabber/Signal board, E55082
PCI connectors; MiniFIZ and/or OptiFlat

Zygo® Phase Measuring Receptacle (PMR = phase shifter) for GPI/Verifire series interferometers.

Complete set of motorized stages for Zygo® New View 100/200/5000 – $2,950

X/Y and Z, tip/tilt with joystick and stage driver

Zygo® New View 100 & 200 parts

Zygo® Mark IV parts

CIDTEC camera, power supplies, boards, LLC, PMR, etc.

Power Supply, Mark-IV version for a Zygo® 12″ Phase Measuring Receptacle (PMR)

P/N 6194-0133-01

Power Supply, Mark-IV version for a Zygo® 12″ Phase Measuring Receptacle (PMR)

P/N 6194-0133-01