Bosby & associates
optical profilers
Note: I have a good selection of interference objectives for your existing profiler. And, even if you’re buying a new profiler, all of these used objective will work on your new system.
All are listed on the Interference Microscope Objectives page.
Zygo New View 7300 SOLD
– Motorized 5-axis stages
– MetroPro 9.1.9 on Dell Windows 7 computer
– 5x, 50x objectives
– Fully tested and guaranteed in working order using my roughness and step height standards.
– Vibration isolation air table w/wrap-around desk
===================================
JUST IN – not tested yet, more details to come
Zygo New View 7300
– Motorized 3-axis stages
– MetroPro on Dell Windows XP computer
– objectives TBD
– Fully tested and guaranteed in working order using my roughness and step height standards.
– Vibration isolation air table w/wrap-around desk
Zygo Precision Reference Flat, 1.4″, S/N 44 – $1,500
Measured at 0.797A RMS on Zygo NexView and PV flatness over full 1.4″ is 0.017 waves (L/50). Excellent optical standard for your shop, for roughness and flatness.
Silicon Carbide Reference Flat, 0.7″, S/N 1 – $950 SOLD
Measured at 1.12A RMS on Zygo HPI (0.1A resolution) – Excellent optical roughness standard for your shop.
Zygo Lateral Calibration Standard – $1,500 SOLD
Zygo P/N 6300-2198-01 (VLSI P/N 6635-006-074)
3, 10, 30, 100, 200, 500 micron pitch, all on one die.
Zygo SiC Reference Flat, 0.75″, S/N RM03168 – $950
Measured at 1.062A RMS on Zygo NexView. Excellent roughness standard for your shop.
Silicon Carbide Reference Flat, 1.0″, S/N 456834-0601 – $950
